TOOLS Pipe bender VTm.398

Cutting plastic, metal plastic pipes is a responsible operation and should be done with special tools. VALTEC pipe shears feature stainless steel blades, serrated ratchet and lever opening mechanism, locking latch. The configuration of the support frame, the translational movement of the knife, provides a vertical cut of the tube without deforming the walls, and the knife rises when the handle is extended. This product is recommended for products up to 26 mm in diameter.

Scissors with spring opening mechanism. They make right-angle cuts of plastic and metal-plastic (metal-polymer) pipes up to 40 mm in diameter. The tool's design includes a stainless steel knife, a ratchet mechanism, and a snap lock that locks the scissors in the closed position. Inside the handle is a spring that lifts the knife.

Valtec up to 32mm (VTm.397) pistol-style pipe cutter for plastic, metal plastic pipes up to 32mm diameter. Equipped with a ratchet mechanism with replaceable blades. Using this tool ensures precise pipe cutting with minimal effort. The handle and knife are returned to their original positions by springs. It is used for the installation of polyethylene, metal polymer, monolayer and reinforced polypropylene, other polymers and composite pipes. Without professional tools, it is impossible to guarantee a vertical cut, preserving the geometry of the pipe.

Valtec Pipe Calibrator 16-20-26 mm with Chamfering Knife (VTm.396) for installing multi-layer pipes. Plastic, metal-to-plastic pipe installation techniques provide mandatory end alignment and chamfering, which provides control and recovery of pipe shape, diameter after cutting, placing it on compression or press fit joints without Displacement seal. VALTEC polypropylene triple beam collimators are equipped with inserts made of alloy steel (inserts with cutting edges) to ensure these installations are performed accurately. The recommended calibrator is for 16x2.0/20x2.0/26x3.0 or 26x3.0/32x3.0/40x3.5 mm pipes.