TOOLS Manual crimping tool VTm.293L

Valtec Pipe Calibrator 16-20-26 mm with Chamfering Knife (VTm.396) for installing multi-layer pipes. Plastic, metal-to-plastic pipe installation techniques provide mandatory end alignment and chamfering, which provides control and recovery of pipe shape, diameter after cutting, placing it on compression or press fit joints without Displacement seal. VALTEC polypropylene triple beam collimators are equipped with inserts made of alloy steel (inserts with cutting edges) to ensure these installations are performed accurately. The recommended calibrator is for 16x2.0/20x2.0/26x3.0 or 26x3.0/32x3.0/40x3.5 mm pipes.

The spring conductor Valtec 16 mm internal (VTm.398) is designed for bending metal polymer tubes. Ensure that the bend radius of the three outer diameters of the pipe will not be damaged. Recommended for small pipe segments. The VALTEC range includes internal spring clamps for pipes with outer diameters of 16, 20, 26 and 32 mm.

The outer spring conductor Valtec 16 mm (VTm.399) is designed for bending metal polymer tubes. It guarantees no damage to the bending radius of the three outer tube diameters. It is used when processing extended pipe segments. The conductor moves sequentially from one bend to another along the pipe. The VALTEC range includes external spring clamps for pipes with outer diameters of 16 and 20 mm.

Crimping pliers with a set of nozzles (VTm.293) for manually crimping crimp fittings for piping systems made of polymer, metal polymer, copper and thin-walled stainless steel. The compression force depends on the length of the telescopic handle and is also regulated by the indenter mechanism, in addition, the indenter can be rotated 360° relative to the handle. The mass of the punch tool without nozzle is 3.1 kg. The pliers are equipped with nozzles in TH profiles, designed to fit VALTEC press-fit fittings with diameters of 16, 20, 26, 32 mm.