THERMOSTATIC RADIATOR VALVES Straight thermostatic valve kit VT.046

The main function of the Valtec Angle Adjustment Valve (VT.019) is the ability to regulate the flow of coolant when setting up the heating system. The halves can work with the valve without dismantling the pipe; in the event of a failure, the valve can be repaired. Flow direction does not affect valve throughput, and the high-strength, moisture-resistant brass used in the manufacture of the parts ensures the valve's durability and resistance to periodic corrosion and water hammer on the heating system.

The Valtec direct regulating valve (VT.020) is used to balance heating systems when it is necessary to regulate the flow of coolant through the radiator. Due to the half-grip provided in the design, the valve can be removed and installed without removing the pipe. Important point: The direction of coolant flow does not affect the throughput of the equipment. Valves can be repaired if necessary, but careful handling is rarely necessary. Available in our online store, the valve is designed for operating temperatures up to 120 degrees and pressures up to 10 bar.

The thermostatic liquid head VT.3000 is designed to automatically adjust the flow of heat carrier through the heating radiator according to the air temperature in the room. The valve is wired with the help of an M30 x 1.5 cap nut.

It includes shut-off and control for the hydraulic balance of the heating system as well as thermostatic brass valves, and a head that allows you to automatically maintain the set temperature in the room. Thanks to the half-sleeve provided in the valve design, there is no need to disassemble the pipe when installing components, and the reliable design provides temperatures up to 110 degrees and pressures up to 10 bar.