THERMOSTATIC RADIATOR VALVES Straight manual valve with pipe connection VTc.008

Radiator or collector thermostatic valves for automatic control of water heating systems (floor heating, etc.) and cooling buildings based on signals from thermostats, sensors or controllers. This action is based on the expansion of the liquid in the bellows when current flows through the built-in heating element. Normally closed. The supply voltage is 220 or 24 V. The thread to attach the servo motor to the valve is M30 x 1.5.

The compact angle control valve Valtec (VTC.007L) is a light duty model for manual adjustment of coolant flow. This is the main function, but by replacing the adjustment knob with a protective cap, you can use this part as a setting valve. The presence of the half-grip makes it possible to remove or install the valve without removing the pipe, which greatly simplifies and speeds up the work.

The direct control valve Valtec (VTC.008L) allows you to regulate the flow of coolant through the radiator and it does so smoothly and accurately without overloading the system or subjecting it to additional loads. By replacing the adjustment knob with a protective cap, this part can be used as a setting valve. The presence of the half handle simplifies and speeds up the work by removing and installing the valve without removing the pipe. The design of this part provides internal and external threads for the connection.

Angle valve Valtec (VTc.007) is a high strength, reliable brass part. This valve allows you to smoothly regulate coolant flow through the radiator. By changing the flow force manually, you can avoid overloading and water hammer, which can accelerate the wear of the system. If you install a protective cap instead of an adjustment knob, the valve acts as a setting valve. Thanks to the half-grip, it is possible to install and remove components without removing the pipes. The robust design can withstand operating temperatures up to 110 degrees and pressures up to 10 bar.