THERMOSTATIC RADIATOR VALVES Angle manual valve with pipe connection VTC.007L

A set of Valtec thermostats for straight radiators (VT.046) includes everything needed to attach the radiator to the sides, a hydraulically balanced heating system and to regulate the coolant flow in automatic mode. The kit includes two valves: direct thermostat and regulation, and thermostat head. All elements are made of high-quality, moisture- and heat-resistant materials, guaranteeing a long service life and the ability to reuse each element.

The corner radiator thermostat Valtec (VT.047) is used when setting up the heating system. With it, you can maintain the set air temperature with maximum accuracy: the difference is no more than one degree. Thermostats can be used in homes and workplaces, and they can handle the loads that the heating system experiences periodically. The brass body can withstand temperatures up to 110 degrees and pressures up to 10 bar.

This part allows you to maintain the selected temperature in the room with an accuracy of 1 degree, and since the valve is equipped with a half handle, there is no need to disassemble the pipes. The thermostat is made of brass and is resistant to high temperatures, pressures and overloads to which the system is exposed when balancing the heating system. If properly maintained, the valve can last about 30 years.

Radiator or collector thermostatic valves for automatic control of water heating systems (floor heating, etc.) and cooling buildings based on signals from thermostats, sensors or controllers. This action is based on the expansion of the liquid in the bellows when current flows through the built-in heating element. Normally closed. The supply voltage is 220 or 24 V. The thread to attach the servo motor to the valve is M30 x 1.5.