PRESS FITTINGS FOR MULTILAYER PIPE Elbow with compression connection VTm.253.l

VALTEC crimp fittings are used for the pipe installation of technical installations for water, hot water, conveying gases and liquids, and are non-corrosive to the materials of the pipes and connections. The design features of VALTEC press-fit fittings determine their many advantages over similar products from other companies, notably higher throughput, mechanical strength, temperature stability, connection reliability and durability.

The cross is designed to connect four metal-polymer pipes (metal-plastic pipes) or pipes made of cross-linked polyethylene. The range of VALTEC press crosses includes models with the same bore and models with outlets of different diameters.

Sleeve with retaining clip, sleeve material is AISI 304 ductile stainless steel, clip holder is nylon PA 6. The socket has a mounting socket. The design of the latch ensures the correct position of the tool's nose on the connector, controls the integrity of placing the metal polymer tube over the fitting, and there is no electrical contact between the aluminium layer of the tube and the brass body of the fitting. Sleeve Compression - Not to exceed 1200 N.

Mounting Thread - Pipe according to GOST 6357. Tee with externally threaded transition is designed for joining metal-plastic (metal-polymer) pipes or pipes made of cross-linked polyethylene with internally threaded system elements.