MANIFOLDS AND ACCESSORIES Stainless steel manifold with flow meter VTc.589.EMNX

Manifold with control valve and set of Valtec handles (VTc.560.NE) for 2, 3 and 4 outlets, 3/4" diameter, male thread, connection standard Eurocone. Each outlet has Valve to control the flow of the working medium. Manifold diameter - 1", thread - internal/external. Repairable. Heat carrier operating temperature up to 110 °C and pressure up to 10 bar. It is used to distribute floor heating, radiator heating, cooling Liquid flow in the hot water supply circuit. Comes with a set of red and blue valve handles.

(VTc.510.SS) stainless steel manifold with increased outlet spacing to 100 mm. It is suitable for group installation of apartment water meters in floor metering units in multi-apartment buildings. Outlet pipes are male, 1/2". Outlet pipes are available in numbers from 3 to 8. Manifolds are female, 1". The kit includes a threaded plug for the manifold. The manifold is designed for a working pressure of 8 bar and a maximum medium temperature of 130 °C.

(VTc.505.SS) Stainless steel manifold for distributing liquid flow in floor heating, radiator heating, hot and cold water circuits. It features a larger flow area than its brass counterparts, helping to connect the consumer's normal pressure balance. The center-to-center distance of the outlet pipes is 50 mm. The branch pipe thread is external thread, and the connection standard is European style. The number of outlet tubes is from 2 to 10. The threads of the manifolds are internal, 1". The kit includes threaded plugs for the manifolds. The manifolds are designed for a working pressure of 8 bar and a maximum working temperature medium of 130 °C.

(VTc.588.EMNX) stainless steel manifold block for distributing flow along the contours of floor heating, radiator heating and other climate systems where water or non-refrigerated glycol solution is used as heat carrier with a maximum operating temperature of 90°C , working pressure up to 9 bar.

The outlet of the return manifold of the VTc.588 block is equipped with a thermostatic valve, and the supply outlet is equipped with a regulating micrometer valve. The collector is equipped with a vent with shut-off valve, discharge cock, self-sealing plug. The standard for connecting pipe rings is Eurocone. Includes mounting bracket.

Manifold material is AISI 301 steel, fittings and fittings are CW617N brass, seals and spool gaskets are EPDM 70Sh.