MANIFOLDS AND ACCESSORIES Manifold with stop cocks VTC.560.N

(VTC.500.N) Brass Nickel Plated Manifold with 4 Outlets. Heat carriers operate at temperatures up to 130°C and pressures up to 16 bar. It is used to distribute liquid flow in floor heating, radiator heating, hot and cold water supply circuits.

Manifold with male Valtec (VTc.500.N) for 2, 3 or 4 outlets, 1/2" diameter, with male threads. Manifold Diameter - 3/4 or 1", Thread - Internal /External. The operating temperature of the coolant is up to 130 °C and the pressure is up to 16 bar. It is used to distribute the liquid flow in the supply circuits for floor heating, radiator heating, hot and cold water.

Manifold with shut-off valve Valtec 3. 1″x1/2″ (VTc.580.N) for water and other non-corrosive media to product materials. The body is made of high quality sanitary brass CW617N (European standard EN 12165). Has ½” male threaded outlets. Provides a globe ball valve with a minimum resource of 4000 cycles at each outlet. Manifold Diameter - ¾ or 1", Thread - Internal/External. Non-repairable. Operating Temperature - Up to 110 °C, Pressure - up to 10 bar.

The application manifold Valtec (VTc.580.N) with shut-off valve eliminates the need for additional shut-off valves, control valves and seals, facilitating the design, installation and commissioning of the equipment. In the water supply, the collectors provide equal pressure to consumers, excluding their mutual influence. The heating collector is one of the elements that ensures the required heat supply to the heating plant and the floor heating circuit.

Equipped with two or three Eurocone sockets in the form of a comb in hot-pressed high-strength nickel-plated brass. Its connection to the main line is performed due to the presence of a 1" female thread. And the outlet pipe has a 3⁄4” male Euroconus thread.

The use of Valtec manifolds with two outlets greatly simplifies the installation process and maintenance of water and gas systems. Additionally, this is a convenient opportunity to reduce the number of modulating and locking-type valves. In this case, the operation of connecting one tap does not depend on the state of the other tap.