MANIFOLDS AND ACCESSORIES Junction box VT.ZC6

The adjustable safety valve Valtec (VT.1831) must be purchased when installing a heating system. This valve allows you to quickly relieve excess pressure and avoid emergencies. Order Valtec Safety Valves (VT.1831) at low prices wholesale or retail in our company.

Valtec thermostatic head with remote immersion sensor (VT.5011). The thermostatic head is connected to an external liquid immersion sensor by a 2 m long copper capillary. The control range is 20 to 60 °C. The sensor is mounted in a brass sleeve with 1/2" male thread. The head is used to control the thermostatic valve as part of the floor heating pump mixing unit (floor heating).

Electrothermal Servo Drive Valtec Normally Open 220V (VT.TE3040) for automatic control of radiator or collector thermostatic valves of water heating floor systems and cooling buildings based on signals from thermostats, sensors or controllers. This action is based on the expansion of the reinforced paraffin that fills the bellows when current flows through the built-in heating element. Normally open. Connection of servo motor to valve - via adapter (included).

The heat carrier temperature is controlled by applying a control signal to the actuator of the thermostatic valve of the mixing unit. The value of the control signal depends on the readings of the outside air temperature and coolant temperature sensors included in the controller delivery kit. The controller of the mixing unit VT.K200.M is suitable for the pump mixing unit VT.COMBI.S with the analog servo drive VT.TE 3061. The factory setting of the temperature curve (-20/+50° С; +15/+35 C) allows you to maintain a fairly comfortable temperature in any room with floor heating of any design and in any climate. If other temperature conditions need to be set according to thermal calculation, the user can set the temperature curve by himself. No additional controller setup is required.