BALL VALVES Ball valve with press and female connector VT.242

Used as a shut-off valve for polypropylene pipes in water systems, including potable water, heating and technical installations. The transition of the valve to polypropylene pipe is made using union nuts and the connection to the pipe is socket welded. The second pipe of the crane has internal threads. Handle - Flag, made of galvanized steel with PVC coating.

Ball valve (reduced bore) for engineered systems and technical installations based on metal-plastic pipes, temperature range -15 to +110 °C and working pressure up to 10 bar. Not repairable, minimum resource is 4000 cycles. Equipped with epoxy painted aluminium alloy butterfly handle. Connection with metal polymer pipe - crimp on one side; thread on second leg is male. It does not apply to risers, mains and parts of the system where bending forces may be transmitted to the valve body.

Ball valve Valtec with crimp connection and female thread (VT.342) used as shut-off device in engineered systems for drinking, domestic and technical use, made of metal plastic pipe. This retrofit has reduced access to the crane and cannot be installed on risers, mains, and areas that might transmit bending forces to the crane body. It is also not permitted to use this product as a control valve.

Ball valve (reduced bore) for engineered systems and technical installations based on metal-plastic piping, temperature range -15 to +110 °C and working pressure up to 10 bar. Not repairable, minimum resource is 4000 cycles. Equipped with epoxy painted aluminium alloy butterfly handle. The connection to the metal-polymer pipe adopts a bidirectional crimping method. It does not apply to risers, mains and parts of the system where bending forces may be transmitted to the valve body.