BALL VALVES Ball valve with a temperature sensor socket FF VT.247.N

Ball valve Valtec with crimp connection and female thread (VT.342) used as shut-off device in engineered systems for drinking, domestic and technical use, made of metal plastic pipe. This retrofit has reduced access to the crane and cannot be installed on risers, mains, and areas that might transmit bending forces to the crane body. It is also not permitted to use this product as a control valve.

Ball valve (reduced bore) for engineered systems and technical installations based on metal-plastic piping, temperature range -15 to +110 °C and working pressure up to 10 bar. Not repairable, minimum resource is 4000 cycles. Equipped with epoxy painted aluminium alloy butterfly handle. The connection to the metal-polymer pipe adopts a bidirectional crimping method. It does not apply to risers, mains and parts of the system where bending forces may be transmitted to the valve body.

Ball valves with presses and female joints are used as shut-off valve elements on pipes made of metal-polymer pipes for various applications (drinking, domestic, technical, etc.). This product is a reduced diameter channel and should not be used in risers, main lines and areas where bending forces may be transmitted to the valve body. Furthermore, the valve is not suitable for use as a control valve.

Ball valve VT.243 with 16 mm pressure connection is an improvement on globe valves for drinking, domestic and technical pipes made of metal polymer tubing. The crane has reduced access and does not allow operation in risers, trunks, and areas that may transmit bending forces to the crane body. Also, this product is not suitable for installation as a control valve.