BALL VALVES 3-way ball valve T-port FF VT.361

The filter element is made of stainless steel AISI 316 and is resistant to residual chlorine. Residual impurities are 500 microns in size. The filter plug has an eyelet for sealing. The faucet has an aluminum alloy butterfly handle. Connection thread - internal/internal. Integral installation length is 25% less than when installing separate faucets and diagonal filters.

The direct filter faucet VT.294 is designed for installation at the inlet of residential hot and cold water supply. Due to the turbulent flow of the working medium, when it is rotated by 90°, the filter element mesh is evenly flushed by the flow. In this case, the entire area of the filter element works simultaneously. Since the flow is nearly tangent to the grid, this filter provides a higher degree of filtration than a conventional oblique filter with the same grid. The faucet handle (butterfly) faces the user, which is much more convenient than the top position of the handle in a cramped bathroom.

Used as a shut-off valve on water supply systems (including drinking water), operating temperatures up to 75 °C and pressures up to 10 bar. The presence of a detachable fitting with a locknut makes it possible to change it according to the diameter and material of the hose used. The divider ensures a compact jet at the spout. The crane is equipped with an aluminium flag handle. The connecting thread is external. Not repairable.

Provides flow changes in pipes for water, heating systems, processing plants. Serviceable with L-port ball valve, Teflon (PTFE) seat ring and gland seal, aluminum alloy flag handle. The minimum resource for the crane is 20,000 cycles. The maximum temperature of the working medium is 150°С. All connecting threads are internal.